Kanggo pratélan pepak sing cacahé punjul 17500 ISO standard (taun of 2009), pirsani ISO Catalogue Archived 2008-08-28 at the Wayback Machine..
Watara 300 saka standard sing dasilaké déning ISO lan IEC Joint Technical Committee 1 (JTC1) wis cumepak gratis kanggo umum ing
ISO 1–ISO 999
- ISO 1 Standard referensi temperatur kanggo spesifikasi lan verifikasi produk geometri
- ISO 2 Tèkstil — Paugeran arah puteran benang lan prodhuk kagandhèng
- ISO 3 Preferred number
- ISO 4 Aturan kanggo cekakan tembung lan irah-irahan ing publikasi
- ISO 7 Pipe threads where pressure-tight joints are made on the threads
- ISO 9 Informasi lan dokumentasi — Transliterasi saka aksara Cyrillic menyang Roman — Basa Slavik lan non-Slavik
- ISO 16:1975 Akustik — Standard tuning frequency (Standard musical pitch)
- ISO 31 Kuantitas lan unit
- ISO 65 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
- ISO 68-1 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
- ISO 128 Technical drawings — General principles of presentation
- ISO 216 paper sizes, e.g. the A4 paper size
- ISO 226 Phon based on Fletcher-Munson curves
- ISO 226:2003 Phon based on newer Equal-loudness contours
- ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.
- ISO 233:1984 Transliterasi saka Aksara Arab menyang Roman characters
- ISO 233-2:1993 Transliterasi saka Aksara Arab menyang Roman characters — Part 2: Basa Arab — Simplified transliteration
- ISO 259:1984 Documentation — Transliterasi saka Aksara Ibrani menyang Roman characters
- ISO 259-2:1994 Transliterasi saka Aksara Ibrani menyang Roman — Part 2: Transliterasi prasaja
- ISO 261 General purpose metric screw threads. General plan.
- ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
- ISO 361 Basic ionizing radiation symbol
- ISO 500 Agricultural tractors — Rear-mounted power take-off
- ISO 639 Kodhe basa
- ISO 639-1 Kodhe basa — Part 1: Alpha-2 code
- ISO 639-2 Kodhe basa — Part 2: Alpha-3 code
- ISO 639-3 Kodhe basa — Part 3: Alpha-3 code for comprehensive coverage of languages
- ISO 639-5
- ISO/IEC 646 internationalized 7 bit ASCII variants
- ISO 657 Hot-rolled steel sections
- ISO 668 Specification for Shipping Containers
- ISO 690 Réferènsi bibliografi
- ISO 704
- ISO 732 Fotografi — 120-size lan 220-size filems — Ukuran
- ISO 764 Horology — Magnetic resistant watches
- ISO 838 Standard for punching filing holes menyang paper
- ISO 843:1997 Konversi saka Aksara Yunani menyang Roman
- ISO 860
- ISO 898 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel
- ISO 898-1 Bolts, screws and studs with specified property classes—Coarse thread and fine pitch thread
- ISO 898-2 Nuts with specified proof load values—Coarse thread
- ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
- ISO 898-6 Nuts with specified proof load values—Fine pitch thread
- ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
- ISO 965 General purpose metric screw threads — Toleransi
- ISO 965-1 Principles and basic data
- ISO 965-2 Limits of sizes for general purpose external and internal screw threads.
- ISO 965-3 Deviations for constructional screw threads
- ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H utawa G after galvanizing
- ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- ISO 999 Guidelines for the content, organization, and presentation of indexes
ISO 1000–ISO 9999
- ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
- ISO 1004 Magnetic ink character recognition
- ISO 1007 135 filem format
- ISO/IEC 1539 Fortran programming language
- ISO 1629 Establishes a system of terms and nomenclature for polymers
- ISO 1745 Information processing — Basic mode control procedures for data communication systems
- ISO 1750 Pesticides and other agrochemicals — Common names
- ISO 1789 Medical vehicles and their equipment. Road ambulances
- ISO/IEC 2022 Information technology: Character code structure and extension techniques
- ISO 2108 International standard book numbering (ISBN)
- ISO 2145 Numbering of divisions and subdivisions in written documents
- ISO 2171 Cereals and milled cereal products — Determination of total ash
- ISO 2281 Water-resistant watches
- ISO 2533 Standard Atmosphere
- ISO 2709 Format for information exchange (e.g. MARC)
- ISO 3029 126 filem format
- ISO 3082 Iron ores — Sampling and sample preparation procedures
- ISO 3103 Method of brewing tea for the purpose of sensory tests
- ISO 3166 codes for countries and subdivisions
- ISO 3166-1 codes for country and dependent area names, first published in 1974
- ISO 3166-1 alpha-2 two-letter country codes
- ISO 3166-1 alpha-3 three-letter country codes
- ISO 3166-1 numeric
- ISO 3166-2 principal subdivisions of a country utawa dependent area.
- ISO 3166-3 superseded ISO 3166-1 codes, first published in 1998.
- ISO 3297 International standard serial number (ISSN)
- ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
- ISO 3536 Road vehicles — Safety glazing materials — Vocabulary
- ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests
- ISO 3538 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
- ISO 3601 Fluid power systems — O-rings
- ISO 3601-1 Inside diameters, cross-sections, tolerances and size identification code (Wis dimutakhiraké)
- ISO 3601-2 Housing dimensions for general applications (Wis dimutakhiraké)
- ISO 3601-4 Anti-extrusion rings (back-up rings) (Wis dimutakhiraké)
- ISO 3602 Romanisasi basa Jepang
- ISO 3632 Quality of Saffron
- ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
- ISO 3864 Label kaslametan
- ISO 3901 Kodhe rekaman standar internasional (International Standard Recording Code) (ISRC)
- ISO 3977 Design and procurement standards for gas turbine system applications
- ISO 4157 Subdivisi saka kerja konstruksi
- ISO 4157-1: yasan lan péranganing yasan
- ISO 4157-2: nomer kamar
- ISO 4157-3: idhèntifikasi kamar
- ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
- ISO 4217 Currency codes
- ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- ISO 4628-1 : General introduction and designation system
- ISO 4628-3 : Assessment of degree of rusting
- ISO/IEC 4873:1991 8-bit code for information interchange
- ISO 4892 Plastics—Methods of exposure to laboratory light sources
- ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
- ISO 5167-1 Part 1: General principles and requirements
- ISO 5167-2 Part 2: Orifice plates
- ISO 5167-3 Part 3: Nozzles and Venturi nozzles
- ISO 5167-4 Part 4: Venturi tubes
- ISO 5218 Representation of human sexes
- ISO 5455 Technical drawings: scales
- ISO 5775 Bicycle tyres and rims
- ISO 5800 Photographic Film speed
- ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
- ISO 5971:1981 Size designation of clothes — Pantyhose
- ISO 6166 structure of an International Securities Identifying Number (ISIN)
- ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
- ISO 6194-5 Identification of visual imperfections
- ISO 6344 Coated abrasives — Grain size analysis
- ISO 6344-1 Part 1: Grain size distribution test
- ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
- ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
- ISO 6429 Information technology: Control functions for coded character sets
- ISO 6438 Documentation — African coded character set for bibliographic information interchange
- ISO 6579 Microbiological detection of Salmonella spp in food and animal feeding stuffs.
- ISO 6594 Cast iron drainage pipes and fittings — Spigot series
- ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
- ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
- ISO 7001 Public Information Symbols
- ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
- ISO 7098 Romanization of Chinese
- ISO 7372 Trade data interchange
- ISO/IEC 7501-1:1997 Kartu pengenal— Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
- ISO 7736 Car radio installation space
- ISO/IEC 7810 Kartu pengenal— Physical characteristics
- ISO/IEC 7811 Kartu pengenal— Recording technique
- ISO/IEC 7812 Kartu pengenal— Identification of issuers
- ISO/IEC 7813 Tèknologi informasi — Kartu pengenal— Kartu transaksi finansial
- ISO/IEC 7816 Kartu pengenal— Kartu sirkit kaintegrasi
- ISO/IEC 7942 Graphical Kernel System
- ISO 8090 Cycles — Terminologi
- ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
- ISO 8373 Manipulating Industrial Robots — Vocabulary
- ISO 8402 Quality Management and Quality Assurance — Vocabulary
- ISO 8501-1 Preparation of steel substrates before application of paints and related products
- ISO 8555 Sistem manajemen lingkungan.
- ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
- ISO 8583 Financial transaction card originated messages — Interchange message specifications
- ISO 8583-1 Part 1: Messages, data elements and code values
- ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
- ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
- ISO 8601 Date and time representation
- ISO/IEC 8613 Open Document Architecture
- ISO/IEC 8632 Computer Graphics Metafile
- ISO 8651 Graphical Kernel System language bindings
- ISO/IEC 8652: Information technology — Programming languages — Ada
- ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
- ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
- ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
- ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
- ISO/IEC 8825 ASN.1 Encoding Rules
- ISO 8859 8-bit coded character sets
- ISO 8859-1 Latin-1
- ISO 8859-2 Latin-2
- ISO 8859-3 Latin-3 utawa "South European"
- ISO 8859-4 Latin-4 utawa "North European"
- ISO 8859-5 Cyrillic
- ISO 8859-6 Arabic
- ISO 8859-7 Greek
- ISO 8859-8 Hebrew
- ISO 8859-9 Latin-5
- ISO 8859-10 Latin-6, rearrangement of 8859-4
- ISO 8859-11 Thai
- ISO 8859-13 Latin-7 utawa "Baltic Rim"
- ISO 8859-14 Latin-8 utawa "Celtic"
- ISO 8859-15 Latin-9, revision of 8859-1
- ISO 8859-16 Latin-10 South-Eastern European languages and others
- ISO 8879 Standard Generalized Markup Language (SGML)
- ISO 9000 Quality management system in production environments
- ISO 9001 Quality management
- ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
- ISO/IEC 9075 SQL
- ISO 9126 Software quality model
- ISO 9141 Network interconnection of computers in a vehicle
- ISO 9141-2 OBD-II standard, aka 9141 CARB standard
- ISO 9241 Ergonomic requirements for office work with visual display terminals
- ISO 9362 Bank Identifier Code utawa BIC system
- ISO 9407 Shoe sizes
- ISO/IEC 9541 Information technology — Font information interchange
- ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
- ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
- ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation
- ISO 9564 Banking — Personal Identification Number (PIN) management and security (in ATM and POS systems)
- ISO/IEC 9579 Remote database access for SQL
- ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
- ISO/IEC 9594 Information technology—Open Systems Interconnection -- ???
- ISO 9660 CD-ROM file system
- ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
- ISO/IEC 9797 Information technology — Security techniques — Message Authentication Codes (MACs)
- ISO/IEC 9798 Information technology — Security techniques — Entity authentication
- ISO/IEC 9834 Information technology—Open Systems Interconnection -- ???
- ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
- ISO 9899 C programming language
- ISO/IEC 9945 Portable Operating System Interface (POSIX)
- ISO 9984 Konversi saka Georgian characters menyang Roman characters
- ISO 9985 Konversi saka Armenian characters menyang Roman characters
- ISO 9992:1999 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
- ISO 9999 Technical aids for persons with disabilities. Classification and terminology
ISO 10000–ISO 19999
- ISO 10006 Quality management — Guidelines to quality in project management
- ISO 10007 Quality management — Guidelines for configuration management
- ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
- ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
- ISO/IEC 10026 Open Systems Interconnection
- ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
- ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
- ISO 10160 Interlibrary Loan Application Service Definition — defines terminology used in interlibrary loan
- ISO 10161 Interlibrary Loan Application Protocol
- ISO/IEC 10164 Information technology—Open Systems Interconnection -- ???
- ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
- ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
- ISO 10206 Extended Pascal (programming language)
- ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
- ISO 10279 BASIC programming language
- ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
- ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
- ISO 10487 Connections for passenger car stereos
- ISO 10628 Flow diagrams for process plants
- ISO 10646 Universal Character Set (equivalent to Unicode's character set)
- ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
- ISO 10957 Information and documentation — International Standard Music Number (ISMN)
- ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
- ISO 10993 Biological Evaluation of medical devices
- ISO 10993-1:2008 Evaluation and testing within a risk management system
- ISO 10993-2: Animal welfare requirements.
- ISO 10993-3: tests for genotoxicity, carcinogenicity and reproductive toxicity.
- ISO 10993-4: Selection of tests for interactions with blood.
- ISO 10993-5: Test for in vitro cytotoxicity
- ISO 10993-6:2007 Tests for local effects after implantation.
- ISO 10993-7:2008 Ethylene oxide sterilization residuals
- ISO 10993-8:
- ISO 10993-9:2007 Framework for identification and quantification of potential degradation products.
- ISO 10993-10: Tests for irritation and sensitisation
- ISO 10993-11: Tests for irritation systemic toxicity
- ISO 10993-12:2007 Sample preparation and reference materials.
- ISO 10993-13: Identification and Quantification of degradation products from polymeric medical devices.
- ISO 10993-14: Identification and Quantification of degradation products from ceramics.
- ISO 10993-15: Identification and quantification of degradation products from un-coated utawa coated metals and alloys.
- ISO 10993-16: Toxicokinetic study design for degradation products and leachables.
- ISO 10993-17: Methods for the establishment of allowable limits for leachable substances using health-based risk assessment.
- ISO 10993-18: Chemical characterisation of materials.
- ISO 10993-19: Physico-chemical, morphological and topographical characterization of materials
- ISO 10993-20:2006 Principles and methods for immunotoxicology testing of medical devices
- ISO 11064 Ergonomic Design of Control Centres
- ISO 11064-1:2000 Part 1: Principles for the design of control centres
- ISO 11064-2:2000 Part 2: Principles for the arrangement of control suites
- ISO 11064-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
- ISO 11064-4:2004 Part 4: Layout and dimensions of workstations
- ISO 11064-5:2008 Part 5: Displays and controls
- ISO 11064-6:2005 Part 6: Environmental requirements for control centres
- ISO 11064-7:2006 Part 7: Principles for the evaluation of control centres
- ISO/IEC 11172 MPEG-1
- ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
- ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
- ISO/IEC 11179-1:2004 Part 1: Framework
- ISO/IEC 11179-2:2005 Part 2: Classification
- ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
- ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
- ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
- ISO/IEC 11179-6:2005 Part 6: Registration
- ISO 11180 Postal addressing
- ISO/IEC 11404:1996 Language-independent datatypes (Deleng uga General purpose datatypes)
- ISO 11446:2004 Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
- ISO 11469:2000 Plastics — Generic identification and marking of plastics products
- ISO 11521 Replaced by ISO 15022
- ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
- ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry.
- ISO/IEC 11801 Information technology — Generic cabling for customer premises
- ISO 11898 Road vehicles — Controller area network (CAN)
- ISO 12006 Building construction. Organization of information about construction works.
- ISO 12207 Software lifecycle processes.
- ISO 12639 Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT)
- ISO 13239 High-level data link control (HDLC) procedures
- ISO/IEC 13249 SQL multimedia and application packages
- ISO/IEC 13250 Topic map
- ISO 13346 Volume and file structure of write-once and rewritable médhia, which UDF is based on.
- ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
- ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
- ISO 13406-1:1999 Part 1: Introduction
- ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
- ISO 13407:1999 Human-centred design processes for interactive systems
- ISO 13450 110 filem format
- ISO 13485:2003 Medical Devices — Quality management systems — Requirements for regulatory purposes.
- ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk médhia for information interchange
- ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
- ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
- ISO 13616 Bank Account Numbers (IBAN)
- ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
- ISO/IEC 13818 MPEG-2
- ISO 13837 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
- ISO 14000 Environmental Management Standards in production environments
- ISO 14001 Environmental Management
- ISO 14064 Greenhouse Gases
- ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
- ISO 14230-1 Physical layer
- ISO 14230-2 Data link layer
- ISO 14230-3 Application layer
- ISO 14230-4 Requirements for emission-related systems
- ISO/IEC 14443 Kartu pengenal— Contactless integrated circuit(s) cards — Proximity cards
- ISO/IEC 14496 MPEG-4
- ISO 14644 Standards Cleanrooms and associated controlled environments
- ISO 14644-1:1999 Classification of Air Cleanliness
- ISO 14644-2:2000 Testing and Monitoring to prove Compliance
- ISO 14644-3:2005 Metrology & Test Methods
- ISO 14644-4:2001 Design, Construction and Start-up
- ISO 14644-5:2004 Operations
- ISO 14644-6:2007 Vocabulary
- ISO 14644-7:2004 Separative Devices
- ISO 14644-8:2006 Classification of Airborne Molecular Contamination
- ISO 14644-9 Clean Surfaces
- ISO 14651 Information technology: International string ordering and comparison
- ISO 14698 Standards Archived 2008-10-10 at the Wayback Machine.
- ISO-14698-1 Bio-contamination Control — General Principles
- ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
- ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
- ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
- ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions
- ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
- ISO/IEC 14882 Programming Languages — C++
- ISO 14915 Software ergonomics for multimedia user interfaces
- ISO 14915-1:2002 Part 1: Design principles and framework
- ISO 14915-2:2003 Part 2: Multimedia navigation and control
- ISO 14915-3:2002 Part 3: Media selection and combination
- ISO 14971:2007 Medical Devices — Application Of Risk Management To Medical Devices
- ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
- ISO 15000 Electronic business eXtensible Markup Language ebXML
- ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
- ISO 15000-2:2004 Part 2: Message service specification (ebMS)
- ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
- ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
- ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
- ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
- ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials
- ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
- ISO 15112 Natural gas — Energy determination
- ISO 15189 Medical laboratories — Particular requirements for quality and competence
- ISO 15288 Systems engineering — System life cycle processes
- ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
- ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
- ISO 15403 Natural gas — Natural gas for use as a compressed fuel for vehicles
- ISO 15403-1 Designation of the quality
- ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
- ISO/IEC 15434 Information technology — Automatic Identification and Data Capture Techniques - Syntax for High-Capacity ADC Media. For example: Data Matrix 2D barcode
- ISO/IEC 15444 JPEG 2000
- ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
- ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
- ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
- ISO 15686 Service life planning for constructive works in 10 parts
- ISO 15693 Transponders
- ISO 15706 International Standard Audiovisual Number
- ISO 15707 International Standard Musical Work Code
- ISO 15836 The Dublin Core metadata element set
- ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
- ISO 15924 Codes for the representation of names of scripts
- ISO 15930 Portable Document Format (PDF)
- ISO/IEC 15948:2003 Portable Network Graphics (PNG)
- ISO 15970 Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor
- ISO 15971 Natural gas. Measurement of properties. Calorific value and Wobbe index
- ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
- ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
- ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
- ISO 16232 Road vehicles — Cleanliness of components of fluid circuits
- ISO 16232-8 Particle nature determination by microscopic analysis
- ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
- ISO 16232-10 Expression of results
- ISO/IEC 16262 ECMAScript
- ISO 16549 Textiles — Unevenness of textile strands — Capacitance method
- ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
- ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
- ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
- ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
- ISO/IEC 17025 General requirements for competence of test and calibration laboratories
- ISO 17202 Textiles — Determination of twist in single spun yarns — Untwist/retwist method
- ISO 17776 : Petroleum industries
- ISO/IEC 17799 Information technology: Code of practice for information security management
- ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
- ISO/IEC 18000 Information Technology AIDC Techniques-RFID (Radio Frequency Identification) for Item Management — Air Interface
- 18000-1 Part 1 — Generic Parameters for the Air Interface for Globally Accepted Frequencies
- 18000-2 Part 2 — Parameters for Air Interface Communications below 135 kHz
- 18000-3 Part 3 — Parameters for Air Interface Communications at 13.56 MHz
- 18000-4 Part 4 — Parameters for Air Interface Communications at 2.45 GHz
- 18000-5 Part 5 — Parameters for Air Interface Communications at 5.8 GHz (Withdrawn)
- 18000-6 Part 6 — Parameters for Air Interface Communications at 860 to 960 MHz
- 18000-7 Part 7 — Parameters for Air Interface Communications at 433 MHz
- ISO/IEC 18004: QR Code Standardization
- ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
- ISO/IEC 18014 Information technology — Security techniques — Time-stamping services
- ISO/IEC 18023:2006(E) Information technology — SEDRIS —
- ISO/IEC 18024-4:2006(E) Information technology — SEDRIS language bindings — Part 4: C Archived 2009-10-12 at the Wayback Machine.
- ISO/IEC 18025:2005(E) Information technology — Environmental Data Coding Specification Archived 2013-01-13 at Archive.is (EDCS)
- ISO/IEC 18026:2006(E) Information technology — Spatial Reference Model Archived 2009-06-15 at the Wayback Machine. (SRM)
- ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
- Part 1: General
- Part 2: Asymmetric ciphers
- Part 3: Block ciphers
- Part 4: Stream ciphers
- ISO/IEC 18041-4:2005(E) Information technology — EDCS language bindings — Part 4: C Archived 2010-07-04 at the Wayback Machine.
- ISO/IEC 18042-4:2006(E) Information technology — Spatial Reference Model (SRM) language bindings — Part 4: C Archived 2009-10-12 at the Wayback Machine.
- ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
- ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
- ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
- ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
- ISO 18629 standardized Process Specification Language (PSL).
- ISO 19005 PDF
- ISO 19011 standard providing guidelines for quality and environmental management systems auditing
- ISO 19092-1 Financial Services — Security — Part 1: Security framework
- ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
- ISO 19101 Geographic Information: Reference model
- ISO 19105 Geographic Information: Conformance and testing
- ISO 19107 Geographic Information: Spatial schema
- ISO 19108 Geographic Information: Temporal schema
- ISO 19109 Geographic Information: Rules for Application Schema
- ISO 19110 Geographic Information: Feature cataloguing methodology
- ISO 19111 Geographic Information: Spatial referencing by coordinates
- ISO 19111 Geographic Information: Spatial referencing by identifier
- ISO 19113 Geographic Information: Quality principles
- ISO 19114 Geographic Information: Quality evaluation procedures
- ISO 19115 Geographic Information: Metadata
- ISO 19123 Geographic Information: Coverage schema
- ISO 19128 Geographic Information: Web Map Service
- ISO 19131 Geographic Information: Data product specification
- ISO 19136 Geographic Information: Geography Markup Language
- ISO 19439 Framework for enterprise modelling
- ISO 19440 Constructs for enterprise modelling
- ISO/IEC 19501 Unified Modeling Language (UML)
- ISO/IEC 19502 Meta-Object Facility (MOF)
- ISO/IEC 19503 XML Metadata Interchange (XMI)
- ISO/IEC 19757 Document Schema Definition Languages (DSDL)
- ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
- ISO/IEC 19757-3 Rule-based validation — Schematron
- ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
- ISO/IEC 19770 Information technology — Software asset management
- ISO/IEC 19785 Common Biometric Exchange Formats Framework (CBEFF 2.0)
- ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
- ISO/IEC 19794 Information technology — Biometric data interchange formats
- ISO/IEC 19794-1:2006 Part 1: Framework
- ISO/IEC 19794-2:2005 Part 2: Finger minutiae data
- ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
- ISO/IEC 19794-4:2005 Part 4: Finger image data
- ISO/IEC 19794-5:2005 Part 5: Face image data
- ISO/IEC 19794-6:2005 Part 6: Iris image data
- ISO/IEC 19794-7:2007 Part 7: Signature/sign time series data
- ISO/IEC 19794-8:2006 Part 8: Finger pattern skeletal data
- ISO/IEC 19794-9:2007 Part 9: Vascular image data
- ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data
ISO 20000–ISO 29999
- ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
- ISO 20022 Financial Services — universal financial industry message scheme
- ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
- ISO/IEC TR 20943-1:2003 Part 1: Data elements
- ISO/IEC TR 20943-3:2004 Part 3: Value domains
- ISO 21482 Ionizing-radiation warning -- Supplementary symbol
- ISO 22000 Food safety management systems — Requirements for any organization in the food chain
- ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
- ISO 22241 : Diesel engines — NOx reduction agent AUS 32
- ISO 22241-1 : Quality requirements
- ISO 22241-2 : Test methods
- ISO 22241-3 : Handling, transportation and storing
- ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
- ISO/IEC TR 22250-1:2002 RELAX Core
- ISO/PAS 22399:2007 Social security — Guideline for incident preparedness and operational continuity management
- ISO 22716:2007: Cosmetics.
- ISO/IEC 23270:2003 C# Programming Language
- ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
- ISO/IEC 23360-1 — Part 1: Generic specification
- ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
- ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
- ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
- ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
- ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
- ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
- ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
- ISO 23733 Textiles — Chenille yarns — Test method for the determination of linear density
- ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
- ISO/IEC 24727 Kartu pengenal— Integrated Circuit Card Programming Interfaces
- ISO/IEC 24727-1 — Part 1: Architecture
- ISO/IEC 24727-2 — Part 2: Generic card interface
- ISO/IEC 24727-3 — Part 3: Application interface
- ISO/IEC 24727-4 — Part 4: API Administration
- ISO/IEC CD 24727-5 — Part 5: Testing
- ISO/IEC FCD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
- ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
- ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information
and communications technology disaster recovery services
- ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
- ISO26000 Guideline about Social Responsibility also called ISO SR
- ISO/IEC 26300 OpenDocument Format (ODF)
- ISO/IEC 27000 Information Security Management System Family of Standards
- ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements
- ISO/IEC 27002 Information technology — Security techniques — Code of practice for information security management
- ISO/PAS 28000 - Specification for security management systems for the supply chain
- ISO/PAS 28004 - Guidelines for the implementation of ISO/PAS 28000
- ISO/IEC 29119 Software Testing
- ISO/IEC 29119-1 — Part 1: Concepts & Vocabulary
- ISO/IEC 29119-2 — Part 2: Test Process
- ISO/IEC 29119-3 — Part 3: Test Documentation
- ISO/IEC 29119-4 — Part 4: Test Techniques
- ISO/IEC 29500 Office Open XML
- ISO/IEC 29500-1 — Part 1: Fundamentals and Markup Language Reference
- ISO/IEC 29500-2 — Part 2: Open Packaging Conventions
- ISO/IEC 29500-3 — Part 3: Markup Compatibility and Extensibility
- ISO/IEC 29500-4 — Part 4: Transitional Migration Features
ISO 30000–ISO 39999
- ISO 31000 — Risk Management
- ISO 32000 — Portable Document Format
- ISO/IEC 38500 — Corporate Governance of Information Technology
ISO 80000
- ISO/IEC 80000 — Quantities and Units
Deleng uga
- International Classification for Standards
- Pratélan standar ASTM
- Pratélan standar DIN
- Pratélan standar EN
- Pratélan standar IEC
- Pratélan pamérangan ISO
Réferènsi
Pranala njaba
This article uses material from the Wikipedia Basa Jawa article Dhaptar standar ISO, which is released under the Creative Commons Attribution-ShareAlike 3.0 license ("CC BY-SA 3.0"); additional terms may apply (view authors). Isi cumepak kanthi pangayoman CC BY-SA 4.0, kajaba ana katerangan liyané. Images, videos and audio are available under their respective licenses.
®Wikipedia is a registered trademark of the Wiki Foundation, Inc. Wiki Basa Jawa (DUHOCTRUNGQUOC.VN) is an independent company and has no affiliation with Wiki Foundation.