Water Pollution

Water pollution results when contaminants mix with these water bodies. Contaminants can come from one of four main sources: sewage discharges, industrial activities, agricultural activities, and urban runoff including stormwater. Water pollution is either surface water pollution or groundwater pollution. This form of pollution can lead to many problems, such as the degradation of aquatic ecosystems or spreading water-borne diseases when people use polluted water for drinking or irrigation. Another problem is that water pollution reduces the ecosystem services (such as providing drinking water) that the water resource would otherwise provide.

Sources of water pollution are either point sources or non-point sources. Point sources have one identifiable cause, such as a storm drain, a wastewater treatment plant or an oil spill. Non-point sources are more diffuse, such as agricultural runoff. Pollution is the result of the cumulative effect over time. Pollution may take the form of toxic substances (e.g., oil, metals, plastics, pesticides, persistent organic pollutants, industrial waste products), stressful conditions (e.g., changes of pH, hypoxia or anoxia, increased temperatures, excessive turbidity, changes of salinity), or the introduction of pathogenic organisms. Contaminants may include organic and inorganic substances. A common cause of thermal pollution is the use of water as a coolant by power plants and industrial manufacturers.

Control of water pollution requires appropriate infrastructure and management plans as well as legislation. Technology solutions can include improving sanitation, sewage treatment, industrial wastewater treatment, agricultural wastewater treatment, erosion control, sediment control and control of urban runoff (including stormwater management).

A practical definition of water pollution is: "Water pollution is the addition of substances or energy forms that directly or indirectly alter the nature of the water body in such a manner that negatively affects its legitimate uses."^: 6 Water is typically referred to as polluted when it is impaired by anthropogenic contaminants. Due to these contaminants, it either no longer supports a certain human use, such as drinking water, or undergoes a marked shift in its ability to support its biotic communities, such as fish.

Contaminants with an origin in sewage

The following compounds can all reach water bodies via raw sewage or even treated sewage discharges:

• Various chemical compounds found in personal hygiene and cosmetic products.
• Disinfection by-products found in chemically disinfected drinking water (whilst these chemicals can be a pollutant in the water distribution network, they are fairly volatile and therefore not usually found in environmental waters).
• Hormones (from animal husbandry and residue from human hormonal contraception methods) and synthetic materials such as phthalates that mimic hormones in their action. These can have adverse impacts even at very low concentrations on the natural biota and potentially on humans if the water is treated and utilized for drinking water.
• insecticides and herbicides, often from agricultural runoff.
• Pathogens like Hepatovirus A (HAV may be present in treated wastewater outflows and receiving water bodies but is largely removed during further treatment of drinking water)

Inadequately treated wastewater can convey nutrients, pathogens, heterogenous suspended solids and organic fecal matter.^: 6

 

Pathogens

Bacteria, viruses, protozoans and parasitic worms are examples of pathogens that can be found in wastewater.^: 47 In practice, indicator organisms are used to investigate pathogenic pollution of water because the detection of pathogenic organisms in water sample is difficult and costly, because of their low concentrations. The indicators (bacterial indicator) of fecal contamination of water samples most commonly used are total coliforms (TC) or fecal coliforms (FC), the latter also referred to as thermotolerant coliforms, such as Escherichia coli.^: 52–53

Pathogens can produce waterborne diseases in either human or animal hosts. Some microorganisms sometimes found in contaminated surface waters that have caused human health problems include Burkholderia pseudomallei, Cryptosporidium parvum, Giardia lamblia, Salmonella, norovirus and other viruses, and parasitic worms including the Schistosoma type.

The source of high levels of pathogens in water bodies can be from human feces (due to open defecation), sewage, blackwater, or manure that has found its way into the water body. The cause for this can be lack of sanitation procedures or poorly functioning on-site sanitation systems (septic tanks, pit latrines), sewage treatment plants without disinfection steps, sanitary sewer overflows and combined sewer overflows (CSOs) during storm events and intensive agriculture (poorly managed livestock operations).

Organic compounds

Organic substances that enter water bodies are often toxic.^: 229

• Petroleum hydrocarbons, including fuels (gasoline, diesel fuel, jet fuels, and fuel oil) and lubricants (motor oil), and fuel combustion byproducts, from oil spills or storm water runoff
• Volatile organic compounds, such as improperly stored industrial solvents. Problematic species are organochlorides such as polychlorinated biphenyl (PCBs) and trichloroethylene, a common solvent.

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants.

Inorganic contaminants

 

 

Inorganic water pollutants include for example:

• Ammonia from food processing waste
• Heavy metals from motor vehicles (via urban storm water runoff) and acid mine drainage
• Nitrates and phosphates, from sewage and agriculture (see nutrient pollution)
• Silt (sediment) in runoff from construction sites or sewage, logging, slash and burn practices or land clearing sites.
• Salt: Freshwater salinization is the process of salty runoff contaminating freshwater ecosystems. Human-induced salinization is termed as secondary salinization, with the use of de-icing road salts as the most common form of runoff.

Pharmaceutical pollutants

• Environmental persistent pharmaceutical pollutants, which can include various pharmaceutical drugs and their metabolites (see also drug pollution), such as antidepressant drugs, antibiotics or the contraceptive pill.
• Metabolites of illicit drugs (see also wastewater epidemiology), for example methamphetamine and ecstasy.

Solid waste and plastics

 

Solid waste can enter water bodies through untreated sewage, combined sewer overflows, urban runoff, people discarding garbage into the environment, wind carrying municipal solid waste from landfills and so forth. This results in macroscopic pollution– large visible items polluting the water– but also microplastics pollution that is not directly visible. The terms marine debris and marine plastic pollution are used in the context of pollution of oceans.

Microplastics persist in the environment at high levels, particularly in aquatic and marine ecosystems, where they cause water pollution. 35% of all ocean microplastics come from textiles/clothing, primarily due to the erosion of polyester, acrylic, or nylon-based clothing, often during the washing process.

Stormwater, untreated sewage and wind are the primary conduits for microplastics from land to sea. Synthetic fabrics, tyres, and city dust are the most common sources of microplastics. These three sources account for more than 80% of all microplastic contamination.

Surface water pollution includes pollution of rivers, lakes and oceans. A subset of surface water pollution is marine pollution which affects the oceans. Nutrient pollution refers to contamination by excessive inputs of nutrients.

Globally, about 4.5 billion people do not have safely managed sanitation as of 2017, according to an estimate by the Joint Monitoring Programme for Water Supply and Sanitation. Lack of access to sanitation is concerning and often leads to water pollution, e.g. via the practice of open defecation: during rain events or floods, the human feces are moved from the ground where they were deposited into surface waters. Simple pit latrines may also get flooded during rain events.

As of 2022, Europe and Central Asia account for around 16% of global microplastics discharge into the seas, and although management of plastic waste and its recycling is improving globally, the absolute amount of plastic pollution continues to increase unabated due to the large amount of plastic that is being produced and disposed of. Even if sea plastic pollution were to stop entirely, microplastic contamination of the surface ocean would be projected to continue to increase.

Marine pollution

Nutrient pollution

 

Nutrient pollution, a form of water pollution, refers to contamination by excessive inputs of nutrients. It is a primary cause of eutrophication of surface waters (lakes, rivers and coastal waters), in which excess nutrients, usually nitrogen or phosphorus, stimulate algal growth. Sources of nutrient pollution include surface runoff from farm fields and pastures, discharges from septic tanks and feedlots, and emissions from combustion. Raw sewage is a large contributor to cultural eutrophication since sewage is high in nutrients. Releasing raw sewage into a large water body is referred to as sewage dumping, and still occurs all over the world. Excess reactive nitrogen compounds in the environment are associated with many large-scale environmental concerns. These include eutrophication of surface waters, harmful algal blooms, hypoxia, acid rain, nitrogen saturation in forests, and climate change.

Thermal pollution

 

Elevated water temperatures decrease oxygen levels (due to lower levels of dissolved oxygen, as gases are less soluble in warmer liquids), which can kill fish (which may then rot) and alter food chain composition, reduce species biodiversity, and foster invasion by new thermophilic species.^{: 179 : 375}

Biological pollution

The introduction of aquatic invasive organisms is a form of water pollution as well. It causes biological pollution.

In many areas of the world, groundwater pollution poses a hazard to the wellbeing of people and ecosystems. One-quarter of the world's population depends on groundwater for drinking, yet concentrated recharging is known to carry short-lived contaminants into carbonate aquifers and jeopardize the purity of those waters.

Point source water pollution refers to contaminants that enter a waterway from a single, identifiable source, such as a pipe or ditch. Examples of sources in this category include discharges from a sewage treatment plant, a factory, or a city storm drain.

The U.S. Clean Water Act (CWA) defines point source for regulatory enforcement purposes (see United States regulation of point source water pollution). The CWA definition of point source was amended in 1987 to include municipal storm sewer systems, as well as industrial storm water, such as from construction sites.

Sewage

Sewage typically consists of 99.9% water and 0.1% solids. Sewage contributes many classes of nutrients that lead to eutrophication. It is a major source of phosphate for example. Sewage is often contaminated with diverse compounds found in personal hygiene, cosmetics, pharmaceutical drugs (see also drug pollution), and their metabolites Water pollution due to environmental persistent pharmaceutical pollutants can have wide-ranging consequences. When sewers overflow during storm events this can lead to water pollution from untreated sewage. Such events are called sanitary sewer overflows or combined sewer overflows.

 

Industrial wastewater

 

Industrial processes that use water also produce wastewater. This is called industrial wastewater. Using the US as an example, the main industrial consumers of water (using over 60% of the total consumption) are power plants, petroleum refineries, iron and steel mills, pulp and paper mills, and food processing industries. Some industries discharge chemical wastes, including solvents and heavy metals (which are toxic) and other harmful pollutants.

Industrial wastewater could add the following pollutants to receiving water bodies if the wastewater is not treated and managed properly:

• Heavy metals, including mercury, lead, and chromium
• Organic matter and nutrients such as food waste: Certain industries (e.g. food processing, slaughterhouse waste, paper fibers, plant material, etc.) discharge high concentrations of BOD, ammonia nitrogen and oil and grease.^: 180
• Inorganic particles such as sand, grit, metal particles, rubber residues from tires, ceramics, etc.;
• Toxins such as pesticides, poisons, herbicides, etc.
• Pharmaceuticals, endocrine disrupting compounds, hormones, perfluorinated compounds, siloxanes, drugs of abuse and other hazardous substances
• Microplastics such as polyethylene and polypropylene beads, polyester and polyamide
• Thermal pollution from power stations and industrial manufacturers
• Radionuclides from uranium mining, processing nuclear fuel, operating nuclear reactors, or disposal of radioactive waste.
• Some industrial discharges include persistent organic pollutants such as per- and polyfluoroalkyl substances (PFAS).

Oil spills

Agriculture

Agriculture is a major contributor to water pollution from nonpoint sources. The use of fertilizers as well as surface runoff from farm fields, pastures and feedlots leads to nutrient pollution. In addition to plant-focused agriculture, fish-farming is also a source of pollution. Additionally, agricultural runoff often contains high levels of pesticides.

Atmospheric contributions (air pollution)

Air deposition is a process whereby air pollutants from industrial or natural sources settle into water bodies. The deposition may lead to polluted water near the source, or at distances up to a few thousand miles away. The most frequently observed water pollutants resulting from industrial air deposition are sulfur compounds, nitrogen compounds, mercury compounds, other heavy metals, and some pesticides and industrial by-products. Natural sources of air deposition include forest fires and microbial activity.

Acid rain is caused by emissions of sulfur dioxide and nitrogen oxide, which react with the water molecules in the atmosphere to produce acids. Some governments have made efforts since the 1970s to reduce the release of sulfur dioxide and nitrogen oxide into the atmosphere. The main source of sulfur and nitrogen compounds that result in acid rain are anthropogenic, but nitrogen oxides can also be produced naturally by lightning strikes and sulphur dioxide is produced by volcanic eruptions. Acid rain can have harmful effects on plants, aquatic ecosystems and infrastructure.

Carbon dioxide concentrations in the atmosphere have increased since the 1850s due anthropogenic influences (emissions of greenhouse gases). This leads to ocean acidification and is another form of water pollution from atmospheric contributions.

 

Water pollution may be analyzed through several broad categories of methods: physical, chemical and biological. Some methods may be conducted in situ, without sampling, such as temperature. Others involve collection of samples, followed by specialized analytical tests in the laboratory. Standardized, validated analytical test methods, for water and wastewater samples have been published.

Common physical tests of water include temperature, Specific conductance or electrical conductance (EC) or conductivity, solids concentrations (e.g., total suspended solids (TSS)) and turbidity. Water samples may be examined using analytical chemistry methods. Many published test methods are available for both organic and inorganic compounds. Frequently used parameters that are quantified are pH, BOD,^: 102 chemical oxygen demand (COD),^: 104 dissolved oxygen (DO), total hardness, nutrients (nitrogen and phosphorus compounds, e.g. nitrate and orthophosphates), metals (including copper, zinc, cadmium, lead and mercury), oil and grease, total petroleum hydrocarbons (TPH), surfactants and pesticides.

The use of a biomonitor or bioindicator is described as biological monitoring. This refers to the measurement of specific properties of an organism to obtain information on the surrounding physical and chemical environment. Biological testing involves the use of plant, animal or microbial indicators to monitor the health of an aquatic ecosystem. They are any biological species or group of species whose function, population, or status can reveal what degree of ecosystem or environmental integrity is present. One example of a group of bio-indicators are the copepods and other small water crustaceans that are present in many water bodies. Such organisms can be monitored for changes (biochemical, physiological, or behavioral) that may indicate a problem within their ecosystem.

 

Ecosystems

Water pollution is a major global environmental problem because it can result in the degradation of all aquatic ecosystems – fresh, coastal, and ocean waters. The specific contaminants leading to pollution in water include a wide spectrum of chemicals, pathogens, and physical changes such as elevated temperature. While many of the chemicals and substances that are regulated may be naturally occurring (calcium, sodium, iron, manganese, etc.) the concentration usually determines what is a natural component of water and what is a contaminant. High concentrations of naturally occurring substances can have negative impacts on aquatic flora and fauna. Oxygen-depleting substances may be natural materials such as plant matter (e.g. leaves and grass) as well as human-made chemicals. Other natural and anthropogenic substances may cause turbidity (cloudiness) which blocks light and disrupts plant growth, and clogs the gills of some fish species.

 

Public health and waterborne diseases

A study published in 2017 stated that "polluted water spread gastrointestinal diseases and parasitic infections and killed 1.8 million people" (these are also referred to as waterborne diseases). Persistent exposure to pollutants through water are environmental health hazards, which can increase the likelihood for one to develop cancer or other diseases.

Eutrophication from nitrogen pollution

Nitrogen pollution can cause eutrophication, especially in lakes. Eutrophication is an increase in the concentration of chemical nutrients in an ecosystem to an extent that increases the primary productivity of the ecosystem. Subsequent negative environmental effects such as anoxia (oxygen depletion) and severe reductions in water quality may occur.^: 131 This can harm fish and other animal populations.

Ocean acidification

Ocean acidification is another impact of water pollution. Ocean acidification is the ongoing decrease in the pH value of the Earth's oceans, caused by the uptake of carbon dioxide (CO₂) from the atmosphere.

Water pollution is a problem in developing countries as well as in developed countries.

By country

For example, water pollution in India and China is widespread. About 90 percent of the water in the cities of China is polluted.

 

Pollution control philosophy

One aspect of environmental protection are mandatory regulations but they are only part of the solution. Other important tools in pollution control include environmental education, economic instruments, market forces and stricter enforcements. Standards can be "precise" (for a defined quantifiable minimum or maximum value for a pollutant), or "imprecise" which would require the use of Best available technology (BAT) or Best practicable environmental option (BPEO). Market-based economic instruments for pollution control can include: charges, subsidies, deposit or refund schemes, the creation of a market in pollution credits, and enforcement incentives.

Moving towards a holistic approach in chemical pollution control combines the following approaches: Integrated control measures, trans-boundary considerations, complementary and supplementary control measures, life-cycle considerations, the impacts of chemical mixtures.

Control of water pollution requires appropriate infrastructure and management plans. The infrastructure may include wastewater treatment plants, for example sewage treatment plants and industrial wastewater treatment plants. Agricultural wastewater treatment for farms, and erosion control at construction sites can also help prevent water pollution. Effective control of urban runoff includes reducing speed and quantity of flow.

Water pollution requires ongoing evaluation and revision of water resource policy at all levels (international down to individual aquifers and wells).

Sanitation and sewage treatment

 

Municipal wastewater can be treated by centralized sewage treatment plants, decentralized wastewater systems, nature-based solutions or in onsite sewage facilities and septic tanks. For example, waste stabilization ponds can be a low cost treatment option for sewage.^: 182 UV light (sunlight) can be used to degrade some pollutants in waste stabilization ponds (sewage lagoons). The use of safely managed sanitation services would prevent water pollution caused by lack of access to sanitation.

Well-designed and operated systems (i.e., with secondary treatment stages or more advanced tertiary treatment) can remove 90 percent or more of the pollutant load in sewage. Some plants have additional systems to remove nutrients and pathogens. While such advanced treatment techniques will undoubtedly reduce the discharges of micropollutants, they can also result in large financial costs, as well as environmentally undesirable increases in energy consumption and greenhouse gas emissions.

Sewer overflows during storm events can be addressed by timely maintenance and upgrades of the sewerage system. In the US, cities with large combined systems have not pursued system-wide separation projects due to the high cost, but have implemented partial separation projects and green infrastructure approaches. In some cases municipalities have installed additional CSO storage facilities or expanded sewage treatment capacity.

Industrial wastewater treatment

Agricultural wastewater treatment

Management of erosion and sediment control

 

Sediment from construction sites can be managed by installation of erosion controls, such as mulching and hydroseeding, and sediment controls, such as sediment basins and silt fences. Discharge of toxic chemicals such as motor fuels and concrete washout can be prevented by use of spill prevention and control plans, and specially designed containers (e.g. for concrete washout) and structures such as overflow controls and diversion berms.

Erosion caused by deforestation and changes in hydrology (soil loss due to water runoff) also results in loss of sediment and, potentially, water pollution.

Control of urban runoff (storm water)

 

Legislation

Philippines

In the Philippines, Republic Act 9275, otherwise known as the Philippine Clean Water Act of 2004, is the governing law on wastewater management. It states that it is the country's policy to protect, preserve and revive the quality of its fresh, brackish and marine waters, for which wastewater management plays a particular role.

United States

• Aquatic toxicology
• Environmental impact of pesticides § Water
• Human impacts on the environment
• Pollution
• Trophic state index (water quality indicator for lakes)
• VOC contamination of groundwater
• Water resources management
• Water security