Computing Platform Novena

Novena is an open-source computing hardware project designed by Andrew bunnie Huang and Sean Xobs Cross.

The initial design of Novena started in 2012. It was developed by Sutajio Ko-usagi Pte. Ltd. and funded by a crowdfunding campaign which began on April 15, 2014. The first offering was a 1.2 GHz Freescale Semiconductor i.MX6 quad-core ARM architecture computer closely coupled with a Xilinx FPGA. It was offered in "desktop", "laptop", or "heirloom laptop" form, or as a standalone motherboard.

Novena
Novena logo
Computing Platform Novena
Novena system in operation
Date invented2014
Design firmBunnie Studios
ManufacturerKosagi
Introduced2014
ProcessorARM Cortex-A9 (Freescale i.MX6 quad-core)
Frequency1.2 GHz (quad-core)
Memory4 GiB DDR3
Ports
  • 1 Gbit/s Ethernet
  • 100 Mbit/s Ethernet
  • 2 × USB 2.0, supporting 1.5 A
  • USB OTG
  • HDMI
  • 3.5 mm audio jack
  • SD card reader
Computing Platform Novena
Novena laptop motherboard

On May 19, 2014, the crowdfunding campaign concluded having raised just over 280% of its target. The extra funding allowed the project to achieve the following four "stretch goals", with the three hardware stretch goals being shipped in the form of add-on boards that use the Novena's special high-speed I/O expansion header, as seen in the upper-left of the Novena board:

  • Development of free and open source graphics drivers for the on-board video accelerator (etnaviv)
  • Inclusion of a general-purpose breakout board providing 16 FPGA outputs and eight FPGA inputs (3.3 or 5 V gang-selectable via software), six 10-bit analog inputs (up to 200 ksps sample rate) and two 10-bit analog outputs (~100 ksps max rate)
  • Inclusion of a "ROMulator" breakout board capable of emulating TSOP NAND flash devices
  • Inclusion of a MyriadRF software-defined radio at all hardware-purchasing backing levels.

The Novena shipped with a screwdriver, as users are required to install the battery themselves, screw on the LCD bezel of their choice, and obtain speakers as a kit instead of using speaker boxes. Owners of a 3D printer can make and fine tune their own speaker box. The mainboards were manufactured by AQS, an electronics manufacturing services provider.

See also

References

Tags:

Andrew Huang (hacker)CrowdfundingFPGAFreescale SemiconductorI.MX6Open-source computing hardware

🔥 Trending searches on Wiki English:

ItalyGary O'DonoghueCanadaSenegalBrian PeckMS DhoniCheryl HinesSoviet UnionComstock lawsNickelodeonShane GillisMillie Bobby BrownDebbie ReynoldsIlia MalininPrince Harry, Duke of SussexRusso-Ukrainian WarGeorgia national football teamGeorge W. BushLiu CixinPete ButtigiegMichelle PhillipsList of Indian Premier League seasons and resultsPalm RoyaleRachel McAdamsRuth KearneyInterstate 695 (Maryland)XNXXSaudi ArabiaBattle of New CarthageVietnam WarCatherine, Princess of WalesRidge HollandThe Gentlemen (2024 TV series)The Dark ForestShogunJoely Richardson50 CentZach HymanGary Clark Jr.William, Prince of WalesNeymarBharatiya Janata PartyRemembrance of Earth's PastOlivier GiroudAdam NeumannShakiraFermi paradoxLeBron JamesDeaths in 2024Nicole ShanahanMichaela Jaé RodriguezIvan ToneyNetherlandsHazbin HotelCable (character)Fighter (2024 film)Mckenna GraceImmaculate (2024 film)ZendayaViralKerry Von ErichThe Eras TourList of solar eclipses visible from the United StatesSexual intercourseWrestleMania XLWar (card game)Pete TownshendKobe BryantWes MooreGuy Ritchie2024 Summer OlympicsBrazil national football teamOnce Upon a Time in HollywoodOppenheimer (film)XXXTentacionMary & GeorgeMonk (TV series)Arvind Kejriwal🡆 More