Coefficient Of Relationship

The term coefficient of relationship was defined by Sewall Wright in 1922, and was derived from his definition of the coefficient of inbreeding of 1921. The measure is most commonly used in genetics and genealogy. A coefficient of inbreeding can be calculated for an individual, and is typically one-half the coefficient of relationship between the parents.

In general, the higher the level of inbreeding the closer the coefficient of relationship between the parents approaches a value of 1, expressed as a percentage, and approaches a value of 0 for individuals with arbitrarily remote common ancestors.

Coefficient of relationship

The coefficient of relationship ( $r$ ) between two individuals B and C is obtained by a summation of coefficients calculated for every line by which they are connected to their common ancestors. Each such line connects the two individuals via a common ancestor, passing through no individual which is not a common ancestor more than once. A path coefficient between an ancestor A and an offspring O separated by $n$ generations is given as:

p_{AO}=2^{-n}\cdot {\sqrt {\frac {1+f_{A}}{1+f_{O}}}}

where $f_{A}$ and $f_{O}$ are the coefficients of inbreeding for A and O, respectively.

The coefficient of relationship $r_{BC}$ is now obtained by summing over all path coefficients:

r_{BC}=\sum {p_{AB}\cdot p_{AC}}

By assuming that the pedigree can be traced back to a sufficiently remote population of perfectly random-bred stock (f_A = 0 for all A in the sum) the definition of r may be simplified to

r_{BC}=\sum _{p}{2^{-L(p)}}

where p enumerates all paths connecting B and C with unique common ancestors (i.e. all paths terminate at a common ancestor and may not pass through a common ancestor to a common ancestor's ancestor), and L(p) is the length of the path p.

To give an (artificial) example: Assuming that two individuals share the same 32 ancestors of n = 5 generations ago, but do not have any common ancestors at four or fewer generations ago, their coefficient of relationship would be

{\textstyle r=2^{n}\cdot 2^{-2n}=2^{-n}}

, which for n = 5, is,

{\textstyle 2^{-5}={\frac {1}{32}}}

, or approximately 0.0313 or 3%.

Individuals for which the same situation applies for their 1024 ancestors of ten generations ago would have a coefficient of r = 2⁻¹⁰ = 0.1%. If follows that the value of r can be given to an accuracy of a few percent if the family tree of both individuals is known for a depth of five generations, and to an accuracy of a tenth of a percent if the known depth is at least ten generations. The contribution to r from common ancestors of 20 generations ago (corresponding to roughly 500 years in human genealogy, or the contribution from common descent from a medieval population) falls below one part-per-million.

Human relationships

The coefficient of relationship is sometimes used to express degrees of kinship in numeric terms in human genealogy.

In human relationships, the value of the coefficient of relationship is usually calculated based on the knowledge of a full family tree extending to a comparatively small number of generations, perhaps of the order of three or four. As explained above, the value for the coefficient of relationship so calculated is thus a lower bound, with an actual value that may be up to a few percent higher. The value is accurate to within 1% if the full family tree of both individuals is known to a depth of seven generations.

A first-degree relative (FDR) is a person's parent (father or mother), full sibling (brother or sister) or offspring. It constitutes a category of family members that largely overlaps with the term nuclear family, but without spouses. If the persons are related by blood, the first degree relatives share approximately 50% of their genes. First-degree relatives are a common measure used to diagnose risks for common diseases by analyzing family history.

A second-degree relative (SDR) is someone who shares 25% of a person's genes. It includes uncles, aunts, nephews, nieces, grandparents, grandchildren, half-siblings, and double cousins.

Third-degree relatives are a segment of the extended family and includes first cousins, great grandparents and great grandchildren. Third-degree relatives are generally defined by the expected amount of genetic overlap that exists between two people, with the third-degree relatives of an individual sharing approximately 12.5% of their genes. The category includes great-grandparents, great-grandchildren, grand-uncles, grand-aunts, first cousins, half-uncles, half-aunts, half-nieces and half-nephews.

Degree of relationship	Relationship	Coefficient of relationship (r)
0	identical twins; clones	100% (1)
1	mother / father / daughter / son	50% (2⁻¹)
1	parent's identical twin / identical twin's child	50% (2⁻¹)
2	half-sister / half-brother	25% (2⁻²)
2	full sister / full brother	50% (2⋅2⁻²)
2	3/4-sister / 3/4-brother	37.5% (2⁻²+2⁻³)
2	grandmother / grandfather / granddaughter / grandson	25% (2⁻²)
3	half-aunt / half-uncle / half-niece / half-nephew	12.5% (2⁻³)
3	aunt / uncle / niece / nephew	25% (2⋅2⁻³)
4	half-first cousin	6.25% (2⁻⁴)
4	first cousin	12.5% (2⋅2⁻⁴)
4	sesqui-first cousin	18.75% (3⋅2⁻⁴)
4	double-first cousin	25% (4⋅2⁻⁴)
3	great-grandmother / great-grandfather / great-granddaughter / great-grandson	12.5% (2⁻³)
4	half-grandaunt / half-granduncle / half-grandniece / half-grandnephew	6.25% (2⁻⁴)
4	grandaunt / granduncle / grandniece / grandnephew	12.5% (2⋅2⁻⁴)
5	half-first cousin once removed	3.125% (2⁻⁵)
5	first cousin once removed	6.25% (2⋅2⁻⁵)
5	sesqui-first cousin once removed	9.375% (3⋅2⁻⁵)
5	double-first cousin once removed	12.5% (4⋅2⁻⁵)
6	half-second cousin	1.5625% (2⁻⁶)
6	second cousin	3.125% (2⋅2⁻⁶)
6	sesqui-second cousin	4.6875% (3⋅2⁻⁶)
6	double-second cousin	6.25% (4⋅2⁻⁶)
6	sester-second cousin	7.8125% (5⋅2⁻⁶)
6	triple-second cousin	9.38% (6⋅2⁻⁶)
6	sesqua-second cousin	10.9375% (7⋅2⁻⁶)
6	quadruple-second cousin	12.5% (8⋅2⁻⁶)
4	great-great-grandmother / great-great-grandfather / great-great-granddaughter / great-great-grandson	6.25% (2⁻⁴)
5	half-great-grandaunt / half-great-granduncle / half-great-grandniece / half-great-grandnephew	3.125% (2⁻⁵)
5	great-grandaunt / great-granduncle / great-grandniece / great-grandnephew	6.25% (2⋅2⁻⁵)
6	half-first cousin twice removed	1.5625% (2⁻⁶)
6	first cousin twice removed	3.125% (2⋅2⁻⁶)
6	sesqui-first cousin twice removed	4.6875% (3⋅2⁻⁶)
6	double-first cousin twice removed	6.25% (4⋅2⁻⁶)
7	half-second cousin once removed	0.78125% (2⁻⁷)
7	second cousin once removed	1.5625% (2⋅2⁻⁷)
7	sesqui-second cousin once removed	2.34375% (3⋅2⁻⁷)
7	double-second cousin once removed	3.125% (4⋅2⁻⁷)
7	sester-second cousin once removed	3.90625% (5⋅2⁻⁷)
7	triple-second cousin once removed	4.6875% (6⋅2⁻⁷)
7	sesqua-second cousin once removed	5.46875% (7⋅2⁻⁷)
7	quadruple-second cousin once removed	6.25% (8⋅2⁻⁷)
8	third cousin	0.78125% (2⋅2⁻⁸)
5	great-great-great-grandmother / great-great-great-grandfather / great-great-great-granddaughter / great-great-great-grandson	3.125% (2⁻⁵)
6	half-great-great-grandaunt / half-great-great-granduncle / half-great-great-grandniece / half-great-great-grandnephew	1.5625% (2⁻⁶)
6	great-great-grandaunt / great-great-granduncle / great-great-grandniece / great-great-grandnephew	3.125% (2⋅2⁻⁶)
7	first cousin thrice removed	1.5625% (2⋅2⁻⁷)
8	second cousin twice removed	0.78125% (2⋅2⁻⁸)
9	third cousin once removed	0.390625% (2⋅2⁻⁹)
10	fourth cousin	0.1953125% (2⋅2⁻¹⁰)

Most incest laws concern the relationships where r = 25% or higher, although many ignore the rare case of double first cousins. Some jurisdictions also prohibit sexual relations or marriage between cousins of various degree, or individuals related only through adoption or affinity. Whether there is any likelihood of conception is generally considered irrelevant.

Kinship coefficient

The kinship coefficient is a simple measure of relatedness, defined as the probability that a pair of randomly sampled homologous alleles are identical by descent. More simply, it is the probability that an allele selected randomly from an individual, i, and an allele selected at the same autosomal locus from another individual, j, are identical and from the same ancestor.

Relationship	Kinship coefficient
Individual-self	1/2
full sister / full brother	1/4
mother / father / daughter / son	1/4
grandmother / grandfather / granddaughter / grandson	1/8
aunt / uncle / niece / nephew	1/8
first cousin	1/16
half-sister / half-brother	1/8
Several of the most common family relationships and their corresponding kinship coefficient.

The coefficient of relatedness is equal to twice the kinship coefficient.

Calculation

The kinship coefficient between two individuals, i and j, is represented as Φ_ij. The kinship coefficient between a non-inbred individual and itself, Φ_ii, is equal to 1/2. This is due to the fact that humans are diploid, meaning the only way for the randomly chosen alleles to be identical by descent is if the same allele is chosen twice (probability 1/2). Similarly, the relationship between a parent and a child is found by the chance that the randomly picked allele in the child is from the parent (probability 1/2) and the probability of the allele that is picked from the parent being the same one passed to the child (probability 1/2). Since these two events are independent of each other, they are multiplied Φ_ij = 1/2 X 1/2 = 1/4.

Notes

Coefficient Of Relationship