convert/Text

-- Text used by Module:Convert, for en.wikipedia.org (English). -- This is a separate module to simplify translation for use on another wiki. -- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.  -- Some units accept an SI prefix before the unit code, such as "kg" for kilogram. local SIprefixes = { -- The prefix field is what the prefix should be, if different from the prefix used. ['Y'] = { exponent = 24, name = 'yotta',                  }, ['Z'] = { exponent = 21, name = 'zetta',                  }, ['E'] = { exponent = 18, name = 'exa'  ,                  }, ['P'] = { exponent = 15, name = 'peta' ,                  }, ['T'] = { exponent = 12, name = 'tera' ,                  }, ['G'] = { exponent =  9, name = 'giga' ,                  }, ['M'] = { exponent =  6, name = 'mega' ,                  }, ['k'] = { exponent =  3, name = 'kilo' ,                  }, ['h'] = { exponent =  2, name = 'hecto',                  }, ['da']= { exponent =  1, name = 'deca' , name_us = 'deka' }, ['d'] = { exponent = -1, name = 'deci' ,                  }, ['c'] = { exponent = -2, name = 'centi',                  }, ['m'] = { exponent = -3, name = 'milli',                  }, ['μ'] = { exponent = -6, name = 'micro', prefix = 'µ'     },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC ['µ'] = { exponent = -6, name = 'micro',                  },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 ['u'] = { exponent = -6, name = 'micro', prefix = 'µ'     },  -- not an SI prefix, but allow for people typing this ['n'] = { exponent = -9, name = 'nano' ,                  }, ['p'] = { exponent =-12, name = 'pico' ,                  }, ['f'] = { exponent =-15, name = 'femto',                  }, ['a'] = { exponent =-18, name = 'atto' ,                  }, ['z'] = { exponent =-21, name = 'zepto',                  }, ['y'] = { exponent =-24, name = 'yocto',                  }, }  -- Some units can be qualified with one of the following prefixes, when linked. local customary_units = { { "US", link = "United States customary units" }, { "U.S.", link = "United States customary units" }, { "imperial", link = "Imperial unit" }, { "imp", link = "Imperial unit" }, }  -- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km"). -- key = { "name", link = "article title", exponent = numeric_key_value } -- If lk=on and link is defined, the name of the number will appear as a link. local eng_scales = { ["3"]  = { "thousand", exponent = 3 }, ["6"]  = { "million", exponent = 6 }, ["9"]  = { "billion", link = "1000000000 (number)", exponent = 9 }, ["12"] = { "trillion", link = "1000000000000 (number)", exponent = 12 }, ["15"] = { "quadrillion", link = "1000000000000000 (number)", exponent = 15 }, }  -- One of the following categories is included in the text of each message. local all_categories = { unit = "[[Category:Convert invalid units]]", option = "[[Category:Convert invalid options]]", }  -- For some error messages, the following puts the wanted style around -- each unit code marked like '...%{ft%}...'. local unitcode_regex = '%%([{}])' local unitcode_replace = { ['{'] = '"', ['}'] = '"' }  -- no longer need the more elaborate substitute used before 2013-09-28  -- All messages that may be displayed if a problem occurs. local all_messages = { -- Message format string, %s parameters: anchor, title, text, category. -- Each displayed message starts with "Convert:" so can easily locate by searching article. cvt_format = '[[[Help:Convert messages#%s|convert: %s]]]%s', -- Each of following messages is a table: -- { [1] = 'title',         -- mouseover title text --   [2] = 'text',          -- link text displayed in article --   [3] = 'category key',  -- key to lookup category in all_categories --   [4] = 'anchor',        -- anchor for link to relevant section on help page --   regex = gsub_regex, --   replace = gsub_table, -- }                    Mouseover title text                           Link text               CatKey     Anchor cvt_bad_num        = { 'Value "%s" must be a number'                , 'invalid number'      , 'option',  'invalid_number'       }, cvt_big_prec       = { 'Precision "%s" is too large'                , 'precision too large' , 'option',  'precision_too_large'  }, cvt_invalid_num    = { 'Number has overflowed'                      , 'number overflow'     , 'option',  'number_overflow'      }, cvt_no_num         = { 'Needs the number to be converted'           , 'needs a number'      , 'option',  'needs_number'         }, cvt_no_num2        = { 'Needs another number for a range'           , 'needs another number', 'option',  'needs_another_number' }, cvt_bad_frac       = { 'frac "%s" must be an integer above 1'       , 'invalid fraction'    , 'option',  'invalid_fraction'     }, cvt_bad_prec       = { 'Precision "%s" must be an integer'          , 'invalid precision'   , 'option',  'invalid_precision'    }, cvt_bad_sigfig     = { 'sigfig "%s" must be a positive integer'     , 'invalid sigfig'      , 'option',  'invalid_sigfig'       }, cvt_empty_option   = { 'Ignored empty option "%s"'                  , 'empty option'        , 'option',  'empty_option'         }, cvt_no_spell       = { 'Spelling is not available'                  , 'bug, ask for help'   , 'option',  'ask_for_help'         }, cvt_unknown_option = { 'Ignored invalid option "%s"'                , 'invalid option'      , 'option',  'invalid_option'       }, cvt_bad_default    = { 'Unit "%s" has an invalid default'           , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, cvt_bad_unit       = { 'Unit "%s" is invalid here'                  , 'unit invalid here'   , 'unit'  ,  'unit_invalid_here'    }, cvt_no_default     = { 'Unit "%s" has no default output unit'       , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, cvt_no_unit        = { 'Needs name of unit'                         , 'needs unit name'     , 'unit'  ,  'needs_unit_name'      }, cvt_unknown        = { 'Unit name "%s" is not known'                , 'unknown unit'        , 'unit'  ,  'unknown_unit'         }, cvt_should_be      = { '%s'                                         , 'ambiguous unit'      , 'unit'  ,  'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace }, cvt_mismatch       = { 'Cannot convert "%s" to "%s"'                , 'unit mismatch'       , 'unit'  ,  'unit_mismatch'        }, cvt_bug_convert    = { 'Bug: Cannot convert between specified units', 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, cvt_lookup         = { 'Unit "%s" is incorrectly defined'           , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         }, }  -- Text to join input value/unit with output value/unit. local disp_joins = { -- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; " -- [wantname] gives default abbr=off ["or"]         = { " or "    , "" , " or ", wantname = true }, ["sqbr-sp"]    = { " ["      , "]" }, ["sqbr-nbsp"]  = { " [" , "]" }, ["comma"]      = { ", "      , "" , ", " }, ["slash-sp"]   = { " / "     , "" , wantname = true }, ["slash-nbsp"] = { " / ", "" , wantname = true }, ["slash-nosp"] = { "/"       , "" , wantname = true }, ["b"]          = { " ("      , ")" }, ["(or)"]       = { " ("      , ")", " or " }, ["br"]         = { "
"  , "" , wantname = true }, ["br()"]       = { "
(" , ")", wantname = true }, }  -- Text to separate values in a range. local range_types = { -- Specifying a table requires either: -- * "off" and "on" values (for "abbr=off" and "abbr=on"), or -- * "input" and "output" values (for LHS and RHS); -- other fields are optional. -- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. -- With "exception = true", that also occurs with "adj=on|abbr=on". -- If "adj" is defined here, that text (unchanged) is used with "adj=on". ["+"]      = " + ", [","]      = ", ", [", and"]  = ", and ", [", or"]   = ", or ", ["by"]     = " by ", ["-"]      = "–", ["to about"] = " to about ", ["and"]    = { off = " and ", on = " and ", exception = true }, ["and(-)"] = { input = " and ", output = "–" }, ["or"]     = { off = " or " , on = " or " , exception = true }, ["to"]     = { off = " to " , on = " to " , exception = true }, ["to(-)"]  = { input = " to ", output = "–" }, ["+/-"]    = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true }, ["x"]      = { off = " by ", on = " × ", is_range_x = true }, ["xx"]     = " × ", ["*"]      = "×",  -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}} }  local range_aliases = { -- ["alternative name for a range"] = "standard range name" ["&"]        = "and", ["–"]        = "-", ["–"]  = "-", ["to-"]      = "to(-)", ["×"]        = "x", ["×"]  = "x", ["±"]        = "+/-", ["±"] = "+/-", }  -- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}. -- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}. -- Words must be in correct order for searching, for example, 'x' after 'xx'. local range_words = { '-', '–', 'xx', 'x', '*' }  local ranges = { types = range_types, aliases = range_aliases, words = range_words, }  -- Valid option names. local en_option_name = { -- ["local text for option name"] = "en name used in this module" ["$"] = "$", ["abbr"] = "abbr", ["adj"] = "adj", ["comma"] = "comma", ["debug"] = "debug", ["disp"] = "disp", ["frac"] = "frac", ["lang"] = "lang", ["lk"] = "lk", ["near"] = "near", ["order"] = "order", ["round"] = "round", ["sigfig"] = "sigfig", ["sing"] = "adj",                   -- "sing" is an old alias for "adj" ["sortable"] = "sortable", ["sp"] = "sp", ["spell"] = "spell", }  -- Valid option values. -- Convention: parms.opt_xxx refers to an option that is set here -- (not intended to be set by the template which invokes this module). -- Example: At en.wiki, "abbr" includes: --     ["comma"] = "opt_nocomma" -- As a result, if the template uses abbr=comma, this script sets: --     parms["opt_nocomma"] = true --     parms["abbr"] = nil -- Therefore parms.abbr will be nil, or will have one of the listed values -- that do not start with "opt_". local en_option_value = { -- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$" ["abbr"] = { -- ["local text for option value"] = "en value used in this module" ["comma"] = "opt_nocomma",      -- no numsep in input or output numbers ["def"] = "",                   -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") ["h"] = "on",                   -- abbr=on + use "h" for hand unit (default) ["hh"] = "opt_hand_hh",         -- abbr=on + use "hh" for hand unit ["in"] = "in",                  -- use symbol for LHS unit ["mos"] = "mos",                -- in a range, repeat the input unit (no longer used) ["none"] = "off",               -- old name for "off" ["off"] = "off",                -- use name for all units ["on"] = "on",                  -- use symbol for all units ["out"] = "out",                -- use symbol for RHS unit (default) ["values"] = "opt_values",      -- show only input and output numbers, not units ["~"] = "opt_also_symbol",      -- show input unit symbol as well as name }, ["adj"] = { ["1"] = "opt_singular",         -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1) ["flip"] = "opt_flip",          -- reverse order of input/output ["j"] = "opt_use_nbsp",         -- "join": use " " instead of " " between value and unit name ["mid"] = "opt_adjectival, opt_adj_mid",  -- adj=on with user-specified text after input unit (between input and output) ["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers ["off"] = "",                   -- ignored (off is the default) ["on"] = "opt_adjectival",      -- unit name is singular and hyphenated ["pre"] = "opt_one_preunit",    -- user-specified text before input unit ["ri0"] = "ri0",                -- round input with precision = 0 ["ri1"] = "ri1",                -- round input with precision = 1 ["ri2"] = "ri2",                -- round input with precision = 2 ["ri3"] = "ri3",                -- round input with precision = 3 }, ["comma"] = { ["5"] = "opt_comma5",           -- only use numsep grouping if 5 or more digits ["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits ["gaps5"] = "opt_gaps, opt_comma5",  -- opt_gaps + opt_comma5 ["off"] = "opt_nocomma",        -- no numsep in input or output numbers }, ["debug"] = { ["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible }, ["disp"] = { ["/"] = "or",                   -- see "slash" ["2"] = "opt_output_only",      -- display only output value and symbol/name (not input) ["5"] = "opt_round5",           -- round output value to nearest 5 ["b"] = "b",                    -- join: '(...)' ["(or)"] = "(or)",              -- join: '(...)' with 'or' between outputs in a combination ["br"] = "br",                  -- join: '
' ["br()"] = "br()",              -- join: '
(...)' ["comma"] = "comma",            -- join: ',' ["flip"] = "opt_flip",          -- reverse order of input/output ["flip5"] = "opt_flip, opt_round5",  -- disp=flip + disp=5 ["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers ["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name) ["or"] = "or",                  -- join: 'or' ["out"] = "opt_output_only", ["output number only"] = "opt_output_number_only", ["output only"] = "opt_output_only", ["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units ["s"] = "or",                   -- see "slash" ["slash"] = "or",               -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful ["sqbr"] = "sqbr",              -- join: '[...]' ["table"] = "opt_table",        -- output is suitable for a table cell with align="right" ["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center" ["u2"] = "opt_output_unit_only",  -- display output symbol/name (not input, and not output value) ["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) ["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known ["unit2"] = "opt_output_unit_only", ["x"] = "x",                    -- join: ... (user-specified text) }, -- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more ["lang"] = {-- language for output digits (both en and local digits are always accepted for input) ["en"] = "opt_lang_en",         -- use en digits for numbers, regardless of local language ["local"] = "opt_lang_local",   -- use local digits for numbers (default, although config can change default to en) }, ["lk"] = { ["in"] = "in",                  -- link LHS unit name or symbol ["off"] = "off",                -- do not link: same as default except for hand unit ["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit) ["out"] = "out",                -- link RHS unit name or symbol }, ["near"] = { ["5"] = "opt_round5",           -- round output value to nearest 5 }, ["order"] = { ["flip"] = "opt_flip",          -- reverse order of input/output }, ["round"] = { ["5"] = "opt_round5",           -- round output value to nearest 5 ["25"] = "opt_round25",         -- round output value to nearest 25 ["each"] = "opt_round_each",    -- using default precision in a range, round each output separately (default uses highest precision of each item in range) }, -- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more ["sortable"] = { ["off"] = "",                   -- ignored (off is the default) ["in"] = "opt_sortable_in",     -- output numeric hidden sort field for use in a sortable table, based on input ["on"] = "opt_sortable_in",     -- same ["out"] = "opt_sortable_out",   -- same, based on output }, ["sp"] = { ["us"] = "opt_sp_us",           -- use U.S. spelling (like "meter" instead of default "metre") }, ["spell"] = {                       -- only English spelling is supported; not scientific notation; only some fractions ["in"] = "opt_spell_in",        -- spell input value in words ["In"] = "opt_spell_in, opt_spell_upper",                -- spell input value in words with first letter uppercase ["on"] = "opt_spell_in, opt_spell_out",                  -- spell input and output values in words ["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase }, }  return { SIprefixes = SIprefixes, all_categories = all_categories, all_messages = all_messages, currency = { ['$'] = true, ['£'] = true }, customary_units = customary_units, disp_joins = disp_joins, en_option_name = en_option_name, en_option_value = en_option_value, eng_scales = eng_scales, ranges = ranges, }