Fluid Mechanics Splash

In fluid mechanics, a splash is a sudden disturbance to the otherwise quiescent free surface of a liquid (usually water).

The disturbance is typically caused by a solid object suddenly hitting the surface, although splashes can occur in which moving liquid supplies the energy. This use of the word is onomatopoeic; in the past, the term "plash" has also been used.

Fluid Mechanics Splash
A splash after half a brick hits the water; the image is about half a metre across.
Fluid Mechanics Splash
A drop of water splashing onto a hard surface
Fluid Mechanics Splash
A drop of water splashing onto a water surface, showing the formation of a back-jet
Slow motion video of a fruit falling into water.

Splash also happens when a liquid droplet impacts on a liquid or a solid surface;[citation needed] in this case, a symmetric corona (resembling a coronet) is usually formed as shown in Harold Edgerton's famous milk splash photography, as milk is opaque.[citation needed] Historically, Worthington (1908) was the first one who systematically investigated the splash dynamics using photographs.[citation needed]

Splashes are characterized by transient ballistic flow, and are governed by the Reynolds number and the Weber number. In the image of a brick splashing into water, one can identify freely moving airborne water droplets, a phenomenon typical of high Reynolds number flows; the intricate non-spherical shapes of the droplets show that the Weber number is high.[citation needed] Also seen are entrained air bubbles in the body of the water, and an expanding ring of disturbance propagating away from the impact site.

Sand is said to splash if hit sufficiently hard (see dry quicksand) and sometimes the impact of a meteorite is referred to as splashing, if small bits of ejecta are formed.

Physicist Lei Xu and coworkers at the University of Chicago discovered that the splash due to the impact of a small drop of ethanol onto a dry solid surface could be suppressed by reducing the pressure below a specific threshold. For drops of diameter 3.4 mm falling through air, this pressure was about 20 kilopascals, or 0.2 atmosphere.

A plate made of a hard material on which a stream of liquid is designed to fall is called a "splash plate". It may serve to protect the ground from erosion by falling water, such as beneath an artificial waterfall or water outlet in soft ground. Splash plates are also part of spray nozzles, such as in irrigation sprinkler systems.[citation needed]

See also

References

Tags:

Fluid mechanicsFree surfaceOnomatopoeiaWater

🔥 Trending searches on Wiki English:

List of La Liga top scorersArjun RampalAubrey PlazaYoung SheldonPathu ThalaRob McElhenneyUnited StatesKyrie IrvingJames CordenPhogat sistersList of Scream (film series) charactersTiger ShroffJustin BieberMarylandPrince Harry, Duke of SussexRay LiottaThe Night AgentAnjelica HustonVietnamBarry HumphriesPolite Society (film)Robin WilliamsGlen PowellBrian Cox (actor)Aishwarya Rai BachchanJack HarlowTwitterJayam RaviU-Turn (2023 film)Gabriel BassoKyle SandilandsJesse PlemonsMeta PlatformsScream (franchise)English languagePaul BurrellThe Last of Us (TV series)2023 ACC Men's Premier CupA Man Called OttoList of countries and dependencies by populationStarliteWWE DraftAbraham LincolnSexSmile (2022 film)List of Marvel Cinematic Universe filmsWill Anderson Jr.List of ethnic slursTaiwanBobbi Kristina BrownTom BradyPink (singer)Succession (TV series)WhatsAppJanice DickinsonErling HaalandSerie AKepler's SupernovaIrrfan KhanTimothée ChalametBoston Marathon bombingNon-binary genderAustin ReavesViduthalai Part 1The Evil DeadGame of ThronesAnthony Richardson (American football)UFC 288Black MirrorJawan (film)Barbra StreisandThe Ballad of Songbirds and SnakesA.C. MilanList of The Hunger Games charactersWaffle House IndexMount TakaheTikTok🡆 More